A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it.   It is open when the ball's hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle.[1] The handle lies flat in alignment with the flow when open, and is perpendicular to it when closed, making for easy visual confirmation of the valve's status.     

Ball valves are durable, performing well after many cycles, and reliable, closing securely even after long periods of disuse. These qualities make them an excellent choice for shutoff and control applications, where they are often preferred to gates and globe valves, but they lack their fine control in throttling applications.  The ball valve's ease of operation, repair, and versatility lend it to extensive industrial use, supporting pressures up to 1000 bar and temperatures up to 752 °F (400 °C), depending on design and materials used. Sizes typically range from 0.2 to 48 inches (0.5 cm to 121 cm). Valve bodies are made of metal, plastic, or metal with a ceramic;      

floating balls are often chrome plated for durability. One disadvantage of a ball valve is that they trap water in the center cavity while in the closed position.     

In the event of a freeze, the sides can crack due to expansion of ice forming. Some means of insulation or heat tape in this situation will usually prevent damage.     Another option for cold climates is the "freeze tolerant ball valve". This style of ball valve incorporates a freeze plug in the side so in the event of a freeze up,the freeze plug ruptures (acts as a sacrificial disk), thus making for an easy repair. Now instead of replacing the whole valve, just screw in a new freeze plug.   In the case that a ball valve is used for cryogenics or product that may expand inside of the ball, there is a vent drilled into the upstream side of the valve. This is referred to as a vented ball. Safety is the number one concern when engineers specify a vented ball.   

There are different kinds of ball valves, each adapted for different pressures and different usage.

1.PC Ball Valves It includes One-piece, two-piece, and three piece types, which is for small size of piping with thread, socket weld, and flange connections; and high pressure served. 

2. Floating Ball Valve Floating ball valve is larger than PC ball valve we specified, they usual be consisted by 2 piece or three piece which connected by bolts.     

3. Trunnion Ball Valve As well, trunnion Ball valve is the construction of piece type. Generally, they are composed by there pieces. Their size is large and served at high pressure.